Elevator Forum

give me an email address and I will send a parts manual.Johnny

What print number do you need? There should be a sticker on the duct covers inside the controller or on the cover of the controller or inside the cove...

If they are geared low enough, they won't overhaul. We modernized two old Circle Bar W cars, 200fpm and 1750 rpm motors and they wouldn't move with 12...

Have you cleaned the governor optics and bar code reader? The optic reader and bar code are inside the governor mounted to the circumference of the sh...

On second thought, the spring that occasionally breaks may be in the bypass adjustment. When you pull it out, there is a stem sticking out the back th...

Even tho it is relatively new, replace the leveling adjustment and see if the problem goes away. There is a non-replaceable spring in that adjustment ...

Even thou it is relatively new, replace the leveling adjustment and see if the problem goes away. There is a non-replaceable spring in that adjustment...

muts relay must be picked up to initiate the next run. When soft start drops off line, muts contact makes up and allows muts relay to pick and tell th...

Try this link

fa2j plcs are not available from any source except NOS. Sometimes they can be repaired, but not always

When your doors are completely closed, how close is the operator arm to the top of the shaft on the bullwheel? you should have about 1/8" of shaft sho...

Belts may be loose, otherwise operator is not mechanically setup correctly.

What version of software is in each car? Are you checking the inputs thru the variables (assumed)? When the car is on insp, can you manually (with the...

In the back of the Elevator World, there is an advertisement for a guy that travels all over the US doing just that.

Before you change the taps in the generator, check your 14 and 15 switches for proper operation and contacts. The armature is known to back out and no...