Elevator Forum

Actually, there are four on ebay right now. Three are from a plc surplus company that I have used many times.

There is one on ebay for $40.00

Selector contacts that satisfy zone homing aren't making. It is running from top of zone home to bottom of zone home looking to be satisfied.

LSP pulls in with MOB in the 2f circuit. When lsp is in, leveling is disconnected. When MOB drops, or 2F speed switch drops, LSP drops out and levelin...

Probably the LR relay is not making. Loose rivets on the armature.

Magnetek HPV900 uses either discrete inputs or an analog signal + or - 10Vdc to control speed. I'm sure that magnetek engineering will assist you in s...

Get the customer to contact the independent company that changed the #1 car out and get the wiring changes and the drive parameters. Or, get the drive...

Send me an email and I will send what I have

Do you know if it is a GAE (Garden Apartment Elevator) or an engineered job? What issues are you having, if any? Christy collett could probably help w...

Maybe I asked the wrong question. Is it leaking out of the wormshaft (motor end), the thrust bearing end, the outboard pedestal side, the drive sheave...

Where is the leak?

Has this job had this problem from day one? If the jacks are plumb, you might try the polishing tool from Texacone to try to get the tolerance between...

I had several that had Japanese characters on them. We used to use them for T-III's. I bought a lot of 12 for $24 about 15 years ago. They still sell ...

Sounds like the tolerances of the piston to packing may be on the tight side. You could try adding some Cat oil to lubricate the piston and packing. C...

I didn't know FAST tools had an expiration. I've got a program that is just like world's, except that it came from Dover. It expires in 2046, but I wo...