Elevator Forum

Solution,As an apprentice, the mechanic(s) working with and around you are responsible for what you do! As well as your well being and safety. This wi...

Zag,I would like to know more about the elevator equipment in your building. Please provide us with the data tag information. Such as;1) Manufacturer ...

NewMech,Thanks for keeping us posted. Please let us know how you make out on Monday...Go Nationals! Last edited by jkh; 07/05/14 02:50 AM.

Is the car sitting still or moving when these calls latch? If the car is moving, which direction? If moving, does it latch when the car passes at the ...

VG, it sure sounds like the SPI error.500, are you showing any activity for LON outputs with IMS? F2, LN, L24, SPI cables and/or LON cables could be b...

You may want to check your leveling. I usually set it for 5 to 6 seconds! If the time is too great it can trip those errors. Last edited by jkh; 07...

I changed out a traction Sedgwick residential controller several years back. I still have the old controller. It has an Omron PLC. I don't have the pr...

My condolences to his family and friends. Though I never met him, I did enjoy reading his posts.

Dan,Sorry I don't have any info for your error code. But you may want to post your question in the technical section. This section is for Elevator Cod...

Glad to hear you found it.

"doors remains open s relay dropped and hall calls from top and bottom remains lit when I push button"Just wondering about this part of your post. Is ...

Sorry I was thinking of those IBM relays.Do you have an S and/or a F relay? Are they in?I believe 2LR pulls in from a hall call. Since you disconnecte...

Rac66,Good suggestion...If your main floor fire sensor is tripping AF relay picks. And AF3 contact holds it in.Also look at the individual contacts on...

Adams should have it in stockWorld-electronics may have it. In not, they most likely can repair what you have.I've used them many time for repairs!

Cucuvator,Also, is the S relay in? What about U or D relays? Usually Dover posted the drawing numbers in the controller with the job number. Any chanc...