Elevator Forum

What gets Me! The new mechanics coming into this trade don't even what to find out "How you fixed it!It's true the new stuff is held close to the vest...

Reminds me of a story. Iheard a mechanic called in to work on a ship elevator from Italy. He spoke alittle Italian and with the equipment manual was a...

I think it was the other way around! Mitsubishi was the Japanese rep. for Westinghouse in the 50's and 60's. They based their equipment from Westingho...

Thanks for the info.

Are you getting an error on the safety board. You should start the learn trip away from the terminal floor. Is the car setting the motor field current...

Good Luck. I started a company about a year ago, it takes time. What area will you cover?

Thanks Vatordude, We have a job in SF BayArea that might think about it! I've worked on Schindler's system...It has it's own flaws, but is very intere...

I'll have to think on that one. How are the power supplies doing...Do you have a low output on one or noise (AC) on the supply in any of the car's. ...

Is car-1 the key car in the group. I think it most likely is..I would look in that direction. Sounds like a failure in contacts. If you shut down ant ...

You can use the smlcd to look at error codes and give some commands. You will need a Cadi Tool at some point. Drive is on the bottom of cabinet and go...

I would also check fans on bottom of Allen Bradley drive...If thats what you are using!If they bind up or short they can give out really bad noise thr...