Elevator Forum

vince is right you needto separate clc from anothers boards (selector,door operator) and connect the fast tool in the boton panel next to the power su...

????? what

now is working the led SF1 in car board was on but the relay SF1 donot turn on because the coil was open .the signal 24vcd dont pass through the conta...

gracias ya esta funcionando el problema es que el led SF1 en la tarjeta del carro estaba encendido aunque el relay SF1 no funcionaba estaba la bobina ...

check in world electronic the lap with freedom tool w/software for TIV because TIV and TAC50 are the same in communication the only difference is the ...

3978B041F512A26EF8

what kind of info

sounds good i have IMS but need SITE KEY

please give me a price for this lap and my question is about the IMS only work one year?

ooohhh too much posts,,mmmmm i think you have hydraulic line problem....not electric.Recheck all the hidraulics,lines,tank,filters and connections,"yo...

the most commonly problems with automatic in DMC elevator DOVER1.-The selector guides2.-One magnet out of posicion (slowdown or floor magnet)3.-the sw...

i think this command TFR only is available through IMS for TAC 50 controller because dont have the UIT port

savaria eclipse residential elevator.I dont have signal KEY and SF1.This is new installation and the instruction explain about put a jumper 2 for KEY ...