Elevator Forum

Did you stumble upon the new Otis software in the gen2 or the gen3?

Im not super familiar with this, but doesnt the security go through option boards in the controller?

Is that the ibm really style ? Cuz I've seen those relays do some weird stuff after people manually use them to set a call or open a door. Those littl...

Im sure someone on here will be able to walk you through how much better then myself, but you should be able to plug the laptop into the mul to progra...

Do you have the lap top to be able to look at the cop and set up the cop buttons? Also if you have a corroded ribbon that could cause a short

Just out of curiosity what adjustment are you making after the learn run? I typically turn down the holding torques a bit but other then that I dont h...

I know it's an unpopular opinion but I like the movfr2 operators and have put them on many cars that were not designed to have them. Really only one m...

A guy I work with did one. He said it was pretty easy and had only been a mechanic for less than a year at that point.

I was using a piston sander with 110 grit and that paper was gumming up every 8-10'. It was a 7ish inch piston. But you could tell where the sanding s...

The 177 you'll see a lot from pump to valve or on the oil line return if it has a metal pipe because when you tighten them down the hold tight and the...

Something that maybe helpful for these packings is if they're leaking and you can't find find a nick or blemish that's causing it the. Piston can be t...

What type of doors?

What's your email

Send me the WD number from the controller and I'll see if I have something.

I have used the 177 type and I do not like them. The gasket is kind loose on the pipe so it won't stay in place on its own. When youre changing them o...