Elevator Forum

Did you try an clear the ram and do a reset? If that didn't work check for your 48volts at the controller. Maybe you guys shorted something during the...

I've heard that the owner of Hartford elevator out of CT has a warehouse of old elevator parts.

I use a Milwaukee 5 3/8" metal saw. Looks like a miniature skill saw. You'll need 2 blades to cut out a full cop but it makes good cuts. I also use a ...

It happens. I've had a whole week of Mondays lol

Are the coils energizing ?

Did you change the cords to the edges when you replaced them? Also you can check the door settings and faults with the gal tool to see if it's got any...

Check to see if the edges are lined up. Sometimes if the get hit they can be out of alignment. Are the edges plugged into the movfr board or are they ...

Id check the unit for a code data tage that will tell you what year it was installed and the code year it's compliant to. I don't know what code Calif...

I didn't get your pm, but I sent you one with some info

There's another way to do it using the 3 menu if it has a lcecpu561.. if you pm me I can send you some info I found

I don't remember I you need to cycle the power to set it or if you want to reprogram it you have to cycle the power

Theirs probably a better way of doing it but if you go to menu 4_21_10.. then you use the door open button to program the floors you want it to go to....

I've never heard of any part of a code that requires layout drawings to be present in the MCP for existing lifts. Are you sure you need them? Wiring d...

O man thanks a bunch.

Sent