Elevator Forum

Notifications
Clear all

Vibration

27 Posts
16 Users
0 Reactions
54.2 K Views
 jkh
(@jkh)
Prominent Member
Joined: 17 years ago
Posts: 904

   
ReplyQuote
(@christycollett)
Honorable Member
Joined: 17 years ago
Posts: 420

   
ReplyQuote
 jkh
(@jkh)
Prominent Member
Joined: 17 years ago
Posts: 904

   
ReplyQuote
(@leggy)
Eminent Member
Joined: 17 years ago
Posts: 18
 
Curious if the cars have been static balanced, when extra weight is placed in car the vibration is better? Compensation whisper flexes have been added? Thrust bearings ? with new machines on old gearbox And yes agree with encoder mounting must be aligned perfectly other wise the drive will amplify vibration. Just a thought.



   
ReplyQuote
(@traction)
Estimable Member
Joined: 17 years ago
Posts: 123
 
Originally Posted By: christycollett
(you know a guy that doesn't have that blank look on his face typical of most elevator men)

Really? Everyone has a job to do and no one spoke is more important to the wheel than the next.



   
ReplyQuote
 Len
(@len)
Estimable Member
Joined: 17 years ago
Posts: 194
 
We encountered a similar problem on a 411 mod with existing Westinghouse 28 machine..after hooking up a chart recorder it was determined..the jitter from the ride matched the same from the machine mesh..harmonics from the drive..unfortunately the only way to fix this without changing out the machines..was to slowdown the cars.thus virtually reducing the jitter tremendously...



   
ReplyQuote
(@uppo72)
Honorable Member
Joined: 17 years ago
Posts: 562
 
Originally Posted By: christycollett
Another idea; years ago we had the same problem on a 1000 FPM car in Seattle. Drove us nuts, we did everything you guys mentioned above to no avail. Finally one of the Brighter Bulbs among us (you know a guy that doesn't have that blank look on his face typical of most elevator men) Guess the word he used was "Harmonics" It was combination of several things. His fix was to bolt a flame cut cwt filler on angles attached to the bottom of the Xhead. To give you an idea of the set-up. You could sit on the filler and operate the permit ally mounted car top inspection station. He moved the filler in and out until the vibration disappeared. Know it sounds kinda hokey but it worked.

Work Safe All

CC, is this an air dampener( to fix buffeting from wind resistance) or to adjust the hang of the car within the rails slightly different?

Maybe the last resort is to de-rate the load if the heavier weight fixes the problem?



   
ReplyQuote
(@elevator-bg)
New Member
Joined: 17 years ago
Posts: 1
 
Did you solve the issue? I am having similar problem with a new Sicor installed, ropes are changed, but when in the car you can feel with your feet a vibration when the machine stops. It also has a sound with the vibration, but theyare present only when the machine stops. The machine was checked and it's ok, the floor of the machine room is made of corrugated sheet metal type, which maybe makes resonance.



   
ReplyQuote
 jkh
(@jkh)
Prominent Member
Joined: 17 years ago
Posts: 904
 
AC VVVF?
Speed?
Floors?
Is the brake setting too soon?
Brake tension set correctly?
Does it vibrate more or less with capacity in the car?



   
ReplyQuote
(@elmcannic)
Honorable Member
Joined: 17 years ago
Posts: 635
 
Off topic here, but nevertheless...

Last week I received a call from my area Inspector asking if I had any Motion 4000 Traction Controls on my route. "Nope". Evidently there is a problem within the drive or brake circuit (with at least one recorded accident). The Inspector told me MCE is sending out their Technical Bulletin, and they may even ask that you remove affected units from service until the repairs can be made.
I'm not sure what applications are suspect other than the MCE 4000 model traction controller. If you have or know of any recent MOD's using this model, please have the units serial numbers verified by MCE

Merry Christmas Forum Members



   
ReplyQuote
 jkh
(@jkh)
Prominent Member
Joined: 17 years ago
Posts: 904

   
ReplyQuote
(@smitty)
Reputable Member
Joined: 17 years ago
Posts: 220

   
ReplyQuote
Page 2 / 2
Share:
Scroll to Top