Notifications
Clear all
Topic starter
30/04/2015 8:59 pm
Not having any real issues at the moment, except 1057 and 1062, of which both are encoder issues, top and bottom. Never shutdown though. 150 fpm. Don't have a IMS setup for the tach 20, but have the floppy loaded on a thumb. So i have to do every thing off the not so user friendly user interface. Looking for the schrack part#, who would the vendor be. Any help? Thanks
Topic starter
30/04/2015 11:29 pm
Found the part#s
01/05/2015 12:43 am
Encoder on a tac20 hydro controller??? Only encoder I am aware of is the door encoder. Think you are using the wrong fault log chart.
Topic starter
01/05/2015 1:47 am
Silly,
Good to know it's a Tac22 chart and I was lead to believe it was the same as 20. Got to do some digging. Thanks
Good to know it's a Tac22 chart and I was lead to believe it was the same as 20. Got to do some digging. Thanks
01/05/2015 7:57 am
The selector has an encoder count also. the 1062 is usually a gap in the slowdown magnets, or sometimes to short of a slowdown distance. The Tac22 is a mod version of Tac20A(non-lon). You need a tool to look at fltn command to get better info on the faults.