Notifications
Clear all
Topic starter
14/11/2016 8:42 pm
Hey guys. How do u properly save multiple jobs into ims?
14/11/2016 9:25 pm
You need to look for an IMS User Guide. Should be one where you purchased it.
15/11/2016 8:49 am
Click on add a network, name job then group and car parameters should download.
15/11/2016 10:09 am
In the Control Panel right click Networks select add a Net. It will show up as NET01, right click the new network and select Add a Group, right click the group and select add a car. Then left click the new network and rename it. It's a good idea to change the car name from Car01 to the TK job #. Do the same for every new job you connect to.
Topic starter
15/11/2016 8:03 pm
Thanks. At what point do the parameters actually save to computer ?
15/11/2016 10:19 pm
Just because you log in does not mean Parameters are saved. You must do a transfer from board to computer.. that's under service menu.
16/11/2016 5:23 am
should always create a new network for each individual job. I had a guy who only created one network, which was NET01, then he used this same network for different jobs, he ran into a problem when he was working on a t4, some of the i/o that were being displayed were incorrect. after he created a new job network, the appropriate i.o were now being displayed, and we could see the problem. have to be careful using that tool
16/11/2016 6:15 am
You can use one network if you reload every time. I do know a few guys that insist on doing it like that but you can't back up your jobs and Lon config that way.
16/11/2016 9:14 am
good to know, it was strange, i was helping over phone, and things just did not seem right with the i/o he was giving me. i guess it would make it easier for the guys who don't use it often, to keep it net01, and reload. ill keep that in mind thanks indirt