Notifications
Clear all
Topic starter
06/03/2019 11:24 am
I have a CPU that will not boot. The existing is a 6300JC2 with 675EF10 software in U36 and U63. I ordered a new one from VE and it is a 6300JC5. Will this software work in new CPU? The jumpers are completely different; from old to new CPU, any info on this would be greatly appreciated.
07/03/2019 12:15 am
Sent you a private message
07/03/2019 6:07 am
No, you need HE16 software. Also make sure you don’t fire it up for the first time with your adjusted U22 chip or you will while it and have to adjust from scratch. It should come with a blank for first boot up, then once your watchdog flashes slow, power down and put in your U22.
Topic starter
08/03/2019 10:33 am
So the software in DSP will have to be replaces as welll. Will all cars in group have to be updated.
08/03/2019 10:43 am
The DSP software should be OK, or at least I haven’t had to update it yet. But ya, all cars in the group will need the HE16, but it will work in the old CPUs for the other cars.
Last edited by Indirtwetrust; 03/08/19 02:45 AM.