Elevator Forum

Notifications
Clear all

Dover 1980’s Print

22 Posts
8 Users
0 Reactions
23.7 K Views
(@montana)
Honorable Member
Joined: 17 years ago
Posts: 515
 
The crosshead data tag is a data tag located on the crosshead. It is very dangerous working around elevator equipment if you are not properly trained. I would recommend calling a local elevator service company to help you find some prints for it. Once you have your prints you should make copies for your filing cabinet. Without prints you might find yourself out of compliance with the state or with an elevator that can't be serviced, repaired, or tested efficiently.



   
ReplyQuote
(@eleventh-place)
Active Member
Joined: 17 years ago
Posts: 5
 
Thyssenkrupp has been servicing the unit for many years. They have said no prints are available, but they will make a set for $5500!
In our current financial situation, that would create a major hardship.



   
ReplyQuote
(@indirtwetrust)
Noble Member
Joined: 17 years ago
Posts: 1759
 
That’s too bad, they were Dover. If you just want a set for the machine room so they can’t tell you they can’t work on it, post a couple pics of the controller.



   
ReplyQuote
(@eleventh-place)
Active Member
Joined: 17 years ago
Posts: 5

   
ReplyQuote
(@huskervator)
Eminent Member
Joined: 17 years ago
Posts: 37
 
The picture is a Westinghouse relay logic 4 landing hydraulic control. You should see a metal tag with a GO#. That is the number you will need to obtain the prints. It is possible ADAMS Elevator has the file. Adams is 800-929-9247. Tell them you are looking for electrical drawings for a Westinghouse Elevator Hydraulic Control. Or call your local Schindler office and see if they can help. Schindler purchased Westinghouse Elevator



   
ReplyQuote
(@eleventh-place)
Active Member
Joined: 17 years ago
Posts: 5
 
Thank you. I don't see a metal tag except for the one on the Hydraulic unit, and I don't see any GO# on it. I'll give Adams a call to see if they can help.
Thank you,
Bill



   
ReplyQuote
(@indirtwetrust)
Noble Member
Joined: 17 years ago
Posts: 1759

   
ReplyQuote
Page 2 / 2
Share:
Scroll to Top