Elevator Forum

DMC HD 85 Board Cha...
 
Notifications
Clear all

DMC HD 85 Board Change

5 Posts
3 Users
0 Reactions
7,116 Views
(@hirise)
Trusted Member
Joined: 17 years ago
Posts: 44
Topic starter   [#15342]
Hey Guys a little help would be great;;

Replace a 6300FX3 board with a 6300PY4. replaced the software; changed the jumpers (mistakenly had one jumper in the wrong position thru line in still on INS)
corrected jumper; Diagnostics says "Defective Door Board or no door bd present"

power supplies appear good, P150, PV5, on IN have LED 150 on, PV5 on, no LED WD next to PV5, Jumper J1 on, J2 off, J3 off, J4 on;

Cannot move door via manual door open/close on operator.
Cleared door parameters, placed car on Auto no door cycle/ relearn.

what do yu guys think? thanks

hoistway learn OK car will take off. no doors



   
Quote
(@elmcannic)
Honorable Member
Joined: 17 years ago
Posts: 635

   
ReplyQuote
(@xxxblazexxx)
Estimable Member
Joined: 17 years ago
Posts: 150

   
ReplyQuote
(@elmcannic)
Honorable Member
Joined: 17 years ago
Posts: 635
 
Also
I believe there is an additional cap assy that should accompany that board swap. PN 238CW1. Your board is an replacement that will work.



   
ReplyQuote
(@hirise)
Trusted Member
Joined: 17 years ago
Posts: 44

   
ReplyQuote
Share:
Scroll to Top