Elevator Forum

lifer, i had replaced all boards, except door board, power supply was right on, no ac ripple, perfect. I'm thinking it had something to do with the ma...

well went back today, did not have switches so i decided to experiment, i jumped the uts and tsl switches to eliminate switches, problem still occurre...

got mine from kone spares Kone1, 2,3,4,5,6, and FED sees had a few of them but they were 25 dollars each not sure what number key is for what, just go...

slow down to early, thats correct, did a new hoist way scan just to eliminate that to no avail. switches meter fine, wiring is fine, took a couple day...

did you get the manual i sent you omgitsonme? also i have prints email me if you still need

i have what you need, pm me with your email address and i will send you over some info. do you have the pcd tool? if so, use display 6 to check all th...

i have what you need, pm me with your email address and i will send you over some info. do you have the pcd tool? if so, use display 6 to check all th...

try communicating to each board separately, maybe one board is bad dragging down the communication line. on selector board remove cs3b connector. then...

cost is about 900 thats what i paid a couple years ago from ECI california. if you have the non working tool, great deal they work great.

solid state, looks like you can just order a button, that is unconfigured. If the COP has previously been configured to use the easy button replacemen...

solid state, give me a call, i may be able to give you some info also i was told that you can call kone spares, and give them the floor number of the ...

good find smitty, i was thinking about this last night, i have been checking on how the cpu communicates to the tool. the rj11 connector has 4 wires t...

thanks for the info rolly, bad advice on my part. i have had it backward for some time now, i guess increasing the resistance makes sense now that you...

there is usually a resistor/diode around the brake coil, have you tried decreasing the resistance? if so, i have had a few over the years, that do thi...