Elevator Forum

I highly doubt that the GAL unit will work on multidrop. Not saying a discrete operator can't be made to work but I suspect it will be out of the whee...

pretty sure Waupaca went out of business. the support for residential units is generally fine as long as you are a dealer and they are still in busine...

check print and look for smoke detector in machine room circuit

1290 60-21291 60-31298 60-11294 60-21295 60-11352 60-41353 60-3M-1-3-1-7PKS-P 001 (this sets PARK position to lobby, can set it to another floor if de...

Yes! have the same dilemma currently on a TAC20 (6300PA3). TK still makes the boards but there is a world-wide chip storage, so any boards they do hav...

measure shaft OD and box OD. i have used ones from texacone, never had much luck especially when the shaft is gouged/pitted/etc. up hill battle i'd sa...

Conquest was acquired by Garaventa in 2008, this is how they got into the residential elevator market. I'm sure they supported the product until old s...

drift car into overhead before startup, this was otis protocol on 401s with ward leonard in my area. pulling the disconnect may not do anything if gen...

garaventa bought quest over a decade ago. they actually have a change up for the encoder "o-ring" that is a molded polyurethane roller (red). is your ...

there is a check valve on the bottom stage. can fill and test with varsol or some other mineral spirit to check for leaks. there is also a packing ins...