Elevator Forum

If it is the UCM reset you are hitting ( and after certain faults you have to ) and the elevator is faulting out at floor level I would have said a ve...

No worries jluff just trying to establish what is happening . Haven't worked on a true MRL Gen 2 in ten years ( that was the only type of Gen 2 in the...

Probably the hall interface board ( in a black box separate to the controller) . As it sounds like you know, the boards for car buttons and hall butto...

That's what I thought. Gov reset should only be operative if in safety function mode through the service tool . Sounds like you are either hitting CPU...

Gov reset or UCM reset ? Hitting gov reset shouldn't do anything unless your in safety test function I thought ?

I will pm you .

As a matter of interest I was working at Otis when the first generation of gen2 came on the market , the sales staff and literature claimed that the C...

I have a lot of experience with Gen 2 belts and as mentioned environmental factors play a large factor . There is now a cleaning product which can be ...

In fairness I think the upset was caused as you were given advice by some very experienced and knowledgeable persons but then continued to seek valida...

On the plus side you will probably need the ak1 tool at some point and now you have familiarized yourself with it. And yep , sometimes a result is a r...

No problem , I will send you what I have now . We made the clamps so that they braced against the spring buffer stands . As well as removing the locki...

Hi , done this several times on some 3 stage Algi jacks I have on my route. Its not as bad as you think . Some times if you de pressurize the jacks al...

It certainly sounds a bit more of a controlled way of doing it . I believe Inclinator has the slack rope safety so yes in theory if you lift them enou...

Thanks solid state. A counter weighted drum drive ? Was someone in R and D bored on a Friday afternoon ?