Elevator Forum

Originally it probably had a safety edge and there was no reason to slow the doors down to nudging speed. Now that there is an electronic edge on the ...

Does this have a GAL operator? Make sure the DCL is made up good when the doors are open.

Tight packing will cause a rough breakaway. This can’t be compensated for with valve adjustments.

ECI West in Los Angeles has the parts. Talk to Mike 562-598-7995

Make sure your inspection speed (I DRV VEL) is set to 50FPM

I have done many. You can PM me if you have any questions and we can talk on the phone.

I don't believe there will be a way to cancel a hall call once it is registered in the Mipom system. You could do cross registration. It is set up wit...

I can help you with this over the phone. Send me a PM if you would like to do this.

Have you looked at the open and close relays/contactors in the controller? Whether these are the black Arrowmat or the white Sprecher, they will avent...

However you hook it up you just need to feed RVD2, just make sure you do not have a switch in front of the door detector contact as shown when using a...

This is a relay logic controller. I don't have a print in front of me and I am only going by memory. If it is slowing down for a hall call that means ...