Elevator Forum

check the motion excuses screen. it will tell you why it isn't moving.

The car will return to the bottom floor if it is between floors. Have you tried to make the car re-level at the middle floor. you may have tight or dr...

It sounds like a LDW problem. If you take the car to the mid point of the hoistway and open the brake carefully with the motor leads removed, the car ...

One thing to check is that the P2 timer is a second or so longer than the SB timer on the Brake panel. if it isn't it will cause a 60 error.

You need a service tool to access the I/O's. Unfortunately the SL was short lived. They run well, but when there is a problem you need to have a tool....

what kind of controller do you have. is it a Miprom? SL at the end of your post is suspicious.Usually it is just PMSSC. you may have a serial link con...

First some questions.1- Is this a AC or DC Drive?2- Is it Analog or Digital?3- What does power secured mean? Answering those will help. As for F-8 tha...

I have never worked on a Maida,but something you may want to look at on the Virginia Controller. They have a Relay on the back of the controller that ...

you will have to have some duplicate boards to swap out with this sort of problem. the usual suspects are power board,back plane,(you can try replacin...

I believe the hydro in question is just a regular miprom with the newer style prom board that has a port for the service tool. The tool is used to set...

I don't know the company you are dealing with, but it looks like they are changing a lot of expensive parts in the hope of fixing a problem. I hope yo...

Is this a roped hydraulic elevator? Or do you have an over speed collar on the jack head?

Is this a roped hydraulic elevator?

Does it only happen in the up direction? At only one floor? do the doors open during the pause in operation? Is the problem consistent with every call...

Try Canton Elevator. They can make one to your specs.