Elevator Forum

Any chance the ropes are slipping on the driver? The Miprom has a short deceleration ramp and it doesn’t take much if the ropes have gooped up the dri...

Maybe you already have, but I’d lean towards the selector board first. Besides, if you’re not 100% and you’re going roll the dice, the selector board ...

YOU were doing maintenance? Were you mopping the lift floor or somehow delaying operations? What type of “maintenance” were you doing when it quit wor...

19’s been running silent. Maybe his lift is fixed? It would be nice to read a followup if that’s the case.

Originally Posted by BRG Unit works and I am looking at retirement after almost 40 years in this business. Well quit looking and go… apprehend it!Co...

Originally Posted by Volunteer19 ……. “It is on the first floor everytime, but it's the only elevator and I think that is simply because the last perso...

Originally Posted by beaupeep I agree elmcannic, i’ve had a few issues in the past where levelling speed was set incorrectly and would time out on low...

Always at the first floor is that the bottom floor? I did assume it’s a hydraulic pump elevator. Does the building have a cleaning crew that arrives a...

Plenty of bells ring with this type of issue, but let me ask; are you cycling the power before you call for service (for the benefit of your tenants),...

Not that it “couldn’t help”, but looking at it from a dollars and cents angle you’d be spending loads of YOU’RE money to resolve the issue, and it mig...

As far as the shaft goes, it might look sloppy, but it’s built to specifications. Noise is noise and attempting to mitigate it is an ambitious desire....

If you’re able to reset on of these (actually clear the counters C&D), it’s the same process for resetting each time. You’ll find with these parti...

Did we not cover this back in March? Or are you looking for “new” information?

Forgot the obvious and can’t assume anything;SAF is/is not active on the IMC box?LED’s on top of the IMC box are/are not scrolling?All other inputs su...

Year of install? And no manual either I presume. TPS——- I couldn’t find this acronym for a description. Neither under MCE Traction nor Baldor.However ...