Elevator Forum

That should have been KRMS. Autocorrect doesn't know elevator terminology.

One thing I did forget, I no longer work for kone, they changed the brake system on their machines. So depending upon the brake system, you may or may...

The procedure for performing these tests is dictated by what type of machine you're working on.

The holding force on the mx brake system is set by the gap. Too much gap equals less force. The gap on those is set to .002". If the gap is set proper...

Sounds like your TSU batteries are low. Has the unt been shut off for an extended period of time? Is the car at the top or bottom of the hoist way?

To reset the unintended movement the car has to be on hoistway access then go to menu 10 press enter go to 127 press enter make it a 1 and press enter...

You can set parameter 5-14 to 22 then cycle power. This will override the battery supervision for 22 hours and the car should run on automatic

Well I had some extra time today and went back to this one. Started thinking about it and figured a soft fault from the get go might not be a power su...

The install is a year old. Went to do the first annual and when I got into the hoistway, all I could do is laugh. So this is what the industry has com...

Well I'll be. That is what no one seems to have. Thank you, I'll save their page for future reference.