Elevator Forum

Originally Posted by lowoil I had one trapping people giving door lock faults. Turned out to be the hall lock board. Older version, do you have this? ...

Originally Posted by KSNY are you getting door zone? What landing system? If you have the elevator level at the floor with the door open and put it on...

Indirtwetrust;The cam is attached to the gal pully and picks with the car door movement. The car door should arrive at floor , open car door pick cam ...

witr00: No output at all, even tried a different output (shut off original and programed the new one, moved wire) The car never gives a DO signal unle...

100K+ is allot of money, but we charge $10K for changing the packings, and they normally need to be done every ear or so, some they don't last but a f...

We convert them to In-ground cylinders all the time. Not a big deal. Everything removes from the car and rails pretty well. We add a couple of braces ...

Call Tom at PSI in Chicago area , they sell laptops with software.

I can't believe your company charged you for prints, they are on the manufacturer's web site and available for free to distributors. Yout TK run butto...

You don't have a LULA you , you either have a vertical platform lift or a telecab or possible (but unlikely ) and eclipse. Ive never seem a safety pan...

The print you have is not original , it appears to be something made to replace a lost original.The advise your getting here is frankly wrong, we have...

What's your email, I can send you a pdf set for a duplex.

World electronics will repair it for you.

The new Otis operator Glide A will retrofit the AT400 very well, I would definitely do that over the Omni. Only issue I have seen with the Glide A is ...