Elevator Forum

yes it's geared, one is 2000lbs @ 350 fpm and the other is 2500lbs @ 300fpm

I'll be getting photos today that I can post. I am also looking at replacing entire machine as an option depending on the cost of each. I know of Tita...

be prepared to make alot of phone calls and cold calls. Been doing it myself for a couple of months now.

I have a working IMS laptop that is unlocked and can be used on dover tac 22 tac 50 TIV TIII Tac 20 stuff for sale. I have references from people here...

call Issa in new jersey, He can program, But it might not need it , Is it and older one or a newer one? Do you have all the processor lights on? Ask a...

check the upper and lower hatch switches, normal and such. If one is bad, top or bottom, the other is soon gonna be bad.

There are other ways around this problem. just cut the feed to the button and make sure they are tied into the phase 2 keyswitch. When the phase 2 key...

Oh the other thing is everyone that has these check All the plugs that attach to the adon and the pc board. The molex pins are getting put in wrong. I...

Also some one might have moved the nts magnets proper placement is in manual. You have to do a learn run to get it straight.

21 amd 170 faults - reset, fault Power down faults. 169 replace the damn battery 108 or 109 faults check load weighing.Remember put 50% of load on hal...

green pants I am so sorry to say this please don't take it wrong but what you just posted is what kills the rep of these units. It is what the big o s...

lol i had one of those bosses

Here is an old school tip from one of the old school boys that I used to work with. The IBM relays have a plastic piece on the bottom of the coil to t...

I have had so many selector boards that were bad on these units. It seems to be a weak point with these. As soon as I get position faults I replace th...