Elevator Forum

Schindler 330A Repa...
 
Notifications
Clear all

Schindler 330A Repack?

14 Posts
12 Users
0 Reactions
31.6 K Views
(@administrator)
Honorable Member
Joined: 17 years ago
Posts: 386
Topic starter   [#163]
Schindler 330A Repack?

How the $%#@ do you repack this thing? Is there an easy way to repack this upside-down holeless cylinder?


   
Quote
(@halfpick)
Reputable Member
Joined: 17 years ago
Posts: 239
 
When I was working for the big S, I was told you could do both sides start to finish in 4 hours... I believe D.L. Martin fabricated the jacks....they may have info. Use air to return oil from piston to tank...this will help keep oil mess in pit to a minimum.



   
ReplyQuote
(@halfpick)
Reputable Member
Joined: 17 years ago
Posts: 239
 
I've also been told to allow atleast 8 hours...The last reply was info from a repair crew who had done afew...No real easy way...



   
ReplyQuote
(@elevatorman-1)
Eminent Member
Joined: 17 years ago
Posts: 40

   
ReplyQuote
 PGL
(@pgl)
Eminent Member
Joined: 17 years ago
Posts: 21

   
ReplyQuote
(@3mta3)
Eminent Member
Joined: 17 years ago
Posts: 10

   
ReplyQuote
(@j-sand)
Estimable Member
Joined: 17 years ago
Posts: 100

   
ReplyQuote
(@vince90605)
Trusted Member
Joined: 17 years ago
Posts: 48

   
ReplyQuote
(@j-sand)
Estimable Member
Joined: 17 years ago
Posts: 100
 
Actually not that bad. Definetly take your time. About 6 hours per side would be the norm. Mine had accumulated rust in all of the snap ring grooves. DO NOT just buy the Texacone seals. They have a complete kit that includes wipers (which turned to out be one of the hardest parts), and the most critical pieces, the "O" rings that seal the pistons to the housings. Large snap ring pliers are a must (0.095). Blowing air into the top of the cylinder from a compressor was a huge help with mess reduction. Although for some reason the bleeder plug is a metric bolt thread, not pipe thread. So use a rubber tip from an air gun.

Last edited by J Sand; 07/02/10 10:55 PM.


   
ReplyQuote
(@keith2547)
New Member
Joined: 17 years ago
Posts: 1

   
ReplyQuote
(@greenpants)
Reputable Member
Joined: 17 years ago
Posts: 276
 
my question is why do companies do this crazy stuff? how much money do they save vs. holed hydro or a traction car? it seems like every big company puts this stuff out then figures out its a bad idea shortly after installation but we have to live with it forever. for whatever reason it seems like all these crazy hydro ideas come out of germany. are they trying to get back at us for something?



   
ReplyQuote
(@elevatorfella)
Estimable Member
Joined: 17 years ago
Posts: 102
 
Amen brother!! Nothing but trouble, check my post about having to replace CRIPHNA boards due to a 1 cent resistor burning up. Have had 3 Schindler units at 3 different buildings within 2 weeks because R176 burns up and then?? Guess what no door power! Had people stuck today, so it's another $800 to replace another board....



   
ReplyQuote
(@elevatorman-ny)
Active Member
Joined: 17 years ago
Posts: 11

   
ReplyQuote
(@500fpm)
Trusted Member
Joined: 17 years ago
Posts: 43
 
Does anyone have instructions on re-packing these jacks? They are very difficult to work on. It would be greatly appreciated, thanks.



   
ReplyQuote
Share:
Scroll to Top