Elevator Forum

Notifications
Clear all

Tac50 fault 162

16 Posts
6 Users
0 Reactions
22.7 K Views
(@brianawd)
Active Member
Joined: 17 years ago
Posts: 7
Topic starter   [#7242]
Has any one had this fault before. My tech is working on some tac50 units that were intalled back in 2001 at intel in Oregon. He keeps getting this same fault. He has checked all related realys and I\O's and still can't figur out what the issues



   
Quote
(@sbrmilitia)
Honorable Member
Joined: 17 years ago
Posts: 448
 
Off the top of my head I cannot remember what a 162 is do you have a fault sheet that says what it is?

Is the 162 fatal?



   
ReplyQuote
(@brianawd)
Active Member
Joined: 17 years ago
Posts: 7
Topic starter  
Originally Posted By: sbrmilitia
Off the top of my head I cannot remember what a 162 is do you have a fault sheet that says what it is?

Is the 162 fatal?

From what the tach told me, The 162 fault is related to a GL, FG, or HWM I/O failure. Every time we get this fault we find the car parked on one of the floors with the doors open. Yet when the tech checks all the relayting relays and I/O's they all check out good.



   
ReplyQuote
(@charlie)
Active Member
Joined: 17 years ago
Posts: 17

   
ReplyQuote
(@brianawd)
Active Member
Joined: 17 years ago
Posts: 7

   
ReplyQuote
(@administrator)
Honorable Member
Joined: 17 years ago
Posts: 386
 
The controller thinks the car doors are open when the hall doors are locked. Does this always happen at the same floor or different floors? Have you already changed the GL, HWM, FG Relay?
What kind of door operator do you have? You could be losing the DOL signal intermittently. Or the hall door could be uncoupling from the clutch. I would look at all these different scenarios. Good Luck!



   
ReplyQuote
(@sbrmilitia)
Honorable Member
Joined: 17 years ago
Posts: 448
 
I would change the modules first. I've had these faults when the interlocks were made up but the doors would relax off the limit due to my tomahawk style restrictor getting into a bind and not letting the cab door fully close. You make any adjustments on the limits always rescan your doors(TK door operators.)



   
ReplyQuote
(@brianawd)
Active Member
Joined: 17 years ago
Posts: 7
Topic starter  

Originally Posted By: Administrator
The controller thinks the car doors are open when the hall doors are locked. Does this always happen at the same floor or different floors? Have you already changed the GL, HWM, FG Relay?
What kind of door operator do you have? You could be losing the DOL signal intermittently. Or the hall door could be uncoupling from the clutch. I would look at all these different scenarios. Good Luck!

The tech has already replaced the GL,HWM and FG relay. The door operator is new otis unit. We did this upgrade to all 6 unit in the building at the same time. But this unit is the only one that is having this issue. I will pass this info to my tech. Thank for all the help.



   
ReplyQuote
(@brianawd)
Active Member
Joined: 17 years ago
Posts: 7
Topic starter  
Little more info. Door operators are Otis AT400 with Otis door locks. Door cluth has been replaced with bayanet.



   
ReplyQuote
(@ibconelson)
Eminent Member
Joined: 17 years ago
Posts: 30

   
ReplyQuote
(@sbrmilitia)
Honorable Member
Joined: 17 years ago
Posts: 448
 
Does it have the smart tech door mod board to control that Otis operator?

Last edited by sbrmilitia; 06/05/13 01:16 AM.


   
ReplyQuote
(@brianawd)
Active Member
Joined: 17 years ago
Posts: 7
Topic starter  
Originally Posted By: Ibconelson
Did/does this unit have the secondary gate switch, a kind of TK dpm switch? Some TIV and TAC 50's had these.

Yes it does have a secondary gate switch. Its just a limit swith that otis put in.



   
ReplyQuote
(@brianawd)
Active Member
Joined: 17 years ago
Posts: 7
Topic starter  
Originally Posted By: sbrmilitia
Does it have the smart tech door mod board to control that Otis operator?

No these units do not have the smart tech door mod board.



   
ReplyQuote
(@elmcannic)
Honorable Member
Joined: 17 years ago
Posts: 635
 
Doesn't the Thyssen equipment recognize a timing sequence with regards to Door lock, Gate lock then DCL? Quite possible that this window of time or sequence of closure is a hair off. Maybe a red hair too. Check it out.



   
ReplyQuote
(@ibconelson)
Eminent Member
Joined: 17 years ago
Posts: 30

   
ReplyQuote
Page 1 / 2
Share:
Scroll to Top