Elevator Forum

Swift futura Drive ...
 
Notifications
Clear all

Swift futura Drive Fault

7 Posts
4 Users
0 Reactions
8,505 Views
(@halfpick)
Reputable Member
Joined: 17 years ago
Posts: 239
Topic starter   [#12376]
Unico 1100 Ac Drive. When car just starts a run and only in the down direction I drop the fault contact on the drive. Gives me a low power supply error? Only in the down direction? Anyone seen this before. Getting 58,24,94 errors on the wizard.



   
Quote
 jkh
(@jkh)
Prominent Member
Joined: 17 years ago
Posts: 904
 
58 is an auto reset 3 or more in an hour
94 is your EMSD
24 is where is suspect is the root of your trouble. Your demand and reference velocity are to far apart. You may want to focus on the encoder...



   
ReplyQuote
(@halfpick)
Reputable Member
Joined: 17 years ago
Posts: 239
Topic starter  
We are losing the ready contact from the drive right at the start of acceleration. Only in the down direction....Suspecting the tach is failing at times?



   
ReplyQuote
 jkh
(@jkh)
Prominent Member
Joined: 17 years ago
Posts: 904
 
The "ready contact from the drive" that you are referring to? Is it the contact wired from GV to LCS in the drive?

If it is, this contact opens when the drive sees the motor RPMs over speeding.



   
ReplyQuote
(@smitty)
Reputable Member
Joined: 17 years ago
Posts: 220

   
ReplyQuote
(@elmcannic)
Honorable Member
Joined: 17 years ago
Posts: 635

   
ReplyQuote
(@halfpick)
Reputable Member
Joined: 17 years ago
Posts: 239
Topic starter  
It was a low power supply on +15v. Miltronics supported the repair on the Drive. I did talk to Unico tech support and both were very helpful!



   
ReplyQuote
Share:
Scroll to Top