Notifications
Clear all
Topic starter
25/02/2017 7:01 pm
Hi i need help on this error. Cant inspection or normal.
I got the error code but no error means.
I got the error code but no error means.
ACD=03 (05) 05
E072-91 000 00 S
1 101 0100001 10
K:
Please help guys. =)
nick
26/02/2017 1:40 pm
ACD=03 out of service
E072=When common DC22V power supplied to HALL LON and IND has failed. When DC22V power falls down to specified voltage.
E072=When common DC22V power supplied to HALL LON and IND has failed. When DC22V power falls down to specified voltage.
Topic starter
26/02/2017 6:43 pm
Hi. Thanks for info. My model is Sigma Otis GR1 MRL. May i know DC22V location?
Regards
26/02/2017 7:03 pm
Gnick,
How many elevators are in your building? Are they all Otis units?
How many elevators are in your building? Are they all Otis units?
Topic starter
01/03/2017 6:41 am
Hi. There is 13 lifts in this building. Yup all in Sigma OTIS. Since this is MRL lift, im guessing inside hoistway controller some parts are damage. The only main issue is the lift now on TOP floor level.
regards
01/03/2017 8:25 pm
hello my lifts door always open and cannot properly closed if rain and strong wind...need to reset controller and lift running as usual...my question is why this happen and how to solve this problem...have 3 lift but only one happen this...please anybody can help me how to solve this problem..
25/05/2018 6:37 pm
Sigma Otis lifts is doors doesn't perfectly open. Even the gate endways key doesn't work.
28/05/2018 4:06 pm
I think your bad lift need to do the car door self-learn again and input the right opening/closing door torque parameters.