Notifications
Clear all
Topic starter
22/11/2012 1:33 pm
i am ask from my tech friends they disconnect those place where the found error bypassing means looks this place for founding error ed place not used bypassing the system without protection whole system works properly under company installed rules
but diagnostic methods is different due to unaware of tools and error codes unavailability .......
one of basic problem no logic drawing of parts e.g drive -motion card.etc...................
but diagnostic methods is different due to unaware of tools and error codes unavailability .......
one of basic problem no logic drawing of parts e.g drive -motion card.etc...................
Topic starter
30/11/2012 1:12 pm
hi
The fault accour was B1A.When we reset the elevator control pannel it operated
normally for a while and after it again show the fault B1A and elevotor stops.
We check out the encoder the encoder is not working properly and we replace the encoder card
and checking out that there is an IC named A7800A and Lm78 was faulty.
we replace the card with new one and working on the faulty card to be repaired soon as possible.
30/11/2012 11:06 pm
Sounds like a bad flux capacitor. I would call an elevator company
01/12/2012 9:38 am
With tool press m-2-2-2 and record the bottom numbers.Hit go on to view the faults.
record them here.
01/12/2012 9:40 am
And never ever jump out circuits to run the elevator that allows passengers to ride.
NEVER!!!!!!!!!
01/12/2012 9:51 am
How many others here have gotten P.M's from Khan asking for under the table stuff? I chose to ignore further P.M.s from Khan in my mailbox. But that's just me. Guy sounds like he knows just enough to be dangerous.
Topic starter
03/12/2012 1:20 pm
HI
THNKS ALL AND SORRY FOR ANY MISBEHAVE BRO'S
THNKS ALL 4 GOOD POSTING.
THNKS ALL AND SORRY FOR ANY MISBEHAVE BRO'S
THNKS ALL 4 GOOD POSTING.
05/12/2012 8:27 am
I sure hope its a communcation issue with him and he isnt practicing unsafe work practices. Ive got a couple PMs from him too. I wish him the best but the only advice i am will to give him is Spend the money get a elevator company to fix your issue before you kill someone
Page 2 / 2
Prev