Elevator Forum

Notifications
Clear all

Otis lrs

6 Posts
5 Users
0 Reactions
6,708 Views
(@beaupeep)
Honorable Member
Joined: 17 years ago
Posts: 316
Topic starter   [#14898]
Have a lift that momentarily doesn't accept calls and sits with doors open. Everytime we show up car is running. Customer isn't resetting. Changed main i/o board, and tone generator. Happens on all floors. Anyone ever seen this?



   
Quote
(@magic-smoke)
Trusted Member
Joined: 17 years ago
Posts: 68

   
ReplyQuote
(@beaupeep)
Honorable Member
Joined: 17 years ago
Posts: 316

   
ReplyQuote
(@newmech)
Estimable Member
Joined: 17 years ago
Posts: 203
 
Is the car stuck at a floor with a hall call lit? I would try the cop power supply and hall button interface board.



   
ReplyQuote
(@rac66)
Trusted Member
Joined: 17 years ago
Posts: 68
 
Have you checked the photoeyes/door edge sensor? How about the door open button? Those Otis buttons are junk. The randomness leads me to think it could be one of these.

Last edited by rac66; 08/25/15 04:52 PM.


   
ReplyQuote
(@rolly)
Honorable Member
Joined: 17 years ago
Posts: 729
 
Check or replace the power supply in the COP. You may have ripple on the DC outputs. There are 2 Caps on the power supply. They do decay. The caps are a voltage 2X circuit to supply the 30vdc. If the Caps are bad or decayed, when the line voltage drops the DC reacts violently. At least try replacing the Caps.



   
ReplyQuote
Share:
Scroll to Top