Elevator Forum

Notifications
Clear all

Otis E335M. 1997

5 Posts
3 Users
0 Reactions
4,954 Views
(@jluff)
Noble Member
Joined: 17 years ago
Posts: 776
Topic starter   [#23454]
Hi guys. Got a Otis E335M keeps stopping short on shut down 2006. STM FST TAST OVR. Very intermittent. My tool has no access to ocss on this controller. But did record DBSS. PCU loop fault Any ideas what my problem is ?



   
Quote
(@jluff)
Noble Member
Joined: 17 years ago
Posts: 776

   
ReplyQuote
(@kevin83)
Active Member
Joined: 17 years ago
Posts: 13

   
ReplyQuote
(@kevin83)
Active Member
Joined: 17 years ago
Posts: 13
 
We dont have a lot of those controllers in my neck of the woods but I have had sone of those on my routes in the past. Somehow I remember stm being related to either the drive, encoder or speed sensing related. Im pretty sure those controllers have the speed boards in the back top right of the controller. There is also a speed relay on the right I believe. Make sure the relay contacts are good. If you have a speed board switch it with one from another controller and make sure your encoder coupling is good.

Last edited by Kevin83; 03/19/18 10:03 PM.


   
ReplyQuote
(@intentec-luan)
Active Member
Joined: 17 years ago
Posts: 6

   
ReplyQuote
Share:
Scroll to Top