Elevator Forum

Notifications
Clear all

otis 311 help

7 Posts
5 Users
0 Reactions
11 K Views
(@daniel718)
Trusted Member
Joined: 17 years ago
Posts: 45
Topic starter   [#20299]
hello,
have this unit that keeps shutting down. when i get there the car is always leveled at any giving floor with the doors closed. the error Leds all flash simultaneously. i am only able to return car to service by resetting CPU. has anyone experienced these symptoms?

Last edited by Daniel718; 04/25/17 01:23 AM.


   
Quote
(@rolly)
Honorable Member
Joined: 17 years ago
Posts: 729

   
ReplyQuote
(@elmcannic)
Honorable Member
Joined: 17 years ago
Posts: 635
 
Dan,
You're gonna need to communicate with the controller via laptop or whatever plug in tool. How do you know they're "fault" LEDs?



   
ReplyQuote
 Len
(@len)
Estimable Member
Joined: 17 years ago
Posts: 194
 
The Early 311E..have the binary fault leds on the mcss board.by adding them all together will give you a discriptive flt.



   
ReplyQuote
(@daniel718)
Trusted Member
Joined: 17 years ago
Posts: 45
Topic starter  
thanks for the help all, was able to get a hold of a manual.

so when all binary fault leds are flashing, it means that the controller "timed out waiting for a ready to run signal". i ended up finding out that the contacts for L relay was hanging up preventing M relay from picking.



   
ReplyQuote
(@dj-411)
Eminent Member
Joined: 17 years ago
Posts: 32
 
Could be a ad aux contact. If it doesn't pass the CIO check it will flash all the binary lites. DBD in the inputs needs to go hi and low. Check the DBD input on the mcss brd and follow the circuit back to see what not making.



   
ReplyQuote
(@dj-411)
Eminent Member
Joined: 17 years ago
Posts: 32
 
Could be a ad aux contact. If it doesn't pass the CIO check it will flash all the binary lites. DBD in the inputs needs to go hi and low. Check the DBD input on the mcss brd and follow the circuit back to see what not making.



   
ReplyQuote
Share:
Scroll to Top