Elevator Forum

kone ecospace fault...
 
Notifications
Clear all

kone ecospace faults

9 Posts
5 Users
0 Reactions
16.1 K Views
(@take-the-stairs)
Estimable Member
Joined: 17 years ago
Posts: 120
Topic starter   [#9024]
We just replaced a drive on the kmc831. After the drive was replaced it wouldn't run properly due to encoder fault, we replaced the encoder. we still have faults
21, 41, 169. I give up! I need some assistance! Does anybody know what these faults are, and what I need to do to get this car back moving passengers.



   
Quote
(@jeffers)
Active Member
Joined: 17 years ago
Posts: 10

   
ReplyQuote
(@jeffers)
Active Member
Joined: 17 years ago
Posts: 10
 
That's all my manual has got 😏

Doesn't have anything for the other two fault codes. It's a start tho. Your lift won't run without any safeties lol.



   
ReplyQuote
(@koneisland)
Trusted Member
Joined: 17 years ago
Posts: 93
 
21 is safeties 169 is battery inside car top box run down or exhausted (This usually happens when main power has been turned off for long periods) 41 is false call firing ( should clear when battery is ok )
I assume you did a shaft learn set-up drive and calibrated loadweigher device after you fitted the new encoder.

Last edited by koneisland; 11/19/13 12:40 PM.


   
ReplyQuote
(@take-the-stairs)
Estimable Member
Joined: 17 years ago
Posts: 120

   
ReplyQuote
(@take-the-stairs)
Estimable Member
Joined: 17 years ago
Posts: 120

   
ReplyQuote
 MSS
(@mss)
Active Member
Joined: 17 years ago
Posts: 8

   
ReplyQuote
(@elev-te79)
Estimable Member
Joined: 17 years ago
Posts: 116
 
0041 is an emergency brake monitoring. There are 6 revisions to the LCE fault codes . 0041 was on an old revision that for some reason didn't carry over. You can change parameter 5-9 to 0. Or fix the switch on the emergency brake side.



   
ReplyQuote
(@take-the-stairs)
Estimable Member
Joined: 17 years ago
Posts: 120

   
ReplyQuote
Share:
Scroll to Top