Elevator Forum

Notifications
Clear all

Kone COP Buttons

8 Posts
6 Users
0 Reactions
5,683 Views
(@beaupeep)
Honorable Member
Joined: 17 years ago
Posts: 316
Topic starter   [#36649]
Is it possible to relearn buttons? I currently have a door open, door close and door hold all working as a door open. I’d like to relearn/ reprogram door close and door hold.



   
Quote
 MX4
(@mx4)
Estimable Member
Joined: 17 years ago
Posts: 226

   
ReplyQuote
(@fehlerteufel)
Trusted Member
Joined: 17 years ago
Posts: 57

   
ReplyQuote
(@beaupeep)
Honorable Member
Joined: 17 years ago
Posts: 316

   
ReplyQuote
(@fehlerteufel)
Trusted Member
Joined: 17 years ago
Posts: 57

   
ReplyQuote
(@project-elevator)
Trusted Member
Joined: 17 years ago
Posts: 49
 
I assume it is KONE European type that has F2KMUL. the Chinese one has COB that you easily change the plug connected.
Also you can replace it with Chinese type too. Very cheap.



   
ReplyQuote
(@bowtiedrooster16)
Reputable Member
Joined: 17 years ago
Posts: 279
 
You can re do most cop with that key switch. But you'll Also need the write up with it. As for the f2k tool if you don't have someone to show you how to use it you'll be lost. Pm me and I can give you the doc number for the key switch



   
ReplyQuote
(@smitty)
Reputable Member
Joined: 17 years ago
Posts: 220
 
It works with the software program F2K. It is the interface to the Mul board. You can pretty quickly reconfigure buttons much easier than the arcane method using the key switch. Actually some guys power up a spare MUL board with a couple batteries and can set these things up on a desk before taking them to the field.

Last edited by Smitty; 02/01/24 04:23 AM. Reason: Typo


   
ReplyQuote
Share:
Scroll to Top