Notifications
Clear all
Topic starter
04/10/2016 1:46 am
Car levels fine in the up. In the down it stops an inch low - door opens then it levels up perfectly. Would that be a DC AdJustment? Thank you
04/10/2016 1:50 am
Can you feel a transition from High speed to leveling speed and have a couple inches of stabilized leveling speed?
Topic starter
04/10/2016 2:09 am
Yes
04/10/2016 2:25 am
DC should be it "IF" DC Screen is clean. If it doesn't check your down level speed, may be to fast.
Last edited by Rolly; 10/03/16 06:36 PM.
04/10/2016 3:08 am
Agree with Rolly, you should have 2 to 3 inches of stabilized leveling about 10 to 14 fpm, if not check the DC screen then adjust if necessary. Also I'd check the coil to make sure if car is, shows if valve or electrical.
https://www.elevatorequipment.com/eeco-valve-app
check this app out it should help
https://www.elevatorequipment.com/eeco-valve-app
check this app out it should help
Topic starter
25/10/2016 3:58 am
Thanks guys