Elevator Forum

Cisco VG not workin...
 
Notifications
Clear all

Cisco VG not working with our new elevators

4 Posts
3 Users
0 Reactions
11.6 K Views
(@kaneco)
New Member
Joined: 17 years ago
Posts: 2
Topic starter   [#19561]
My IT department requires the use of a Cisco gateway (VG series) for 3 new elevators we are installing. We recently installed a new Kone elevator, and the VG will not function with this car phone system (AT&T analog lines were installed).

Any suggestions for our new installs? We have a new Kone, Fraco and Thyssen Krupp elevator on their way.

AT&T lines are a very expensive option for us, and not the preferred solution.



   
Quote
 E311
(@e311)
Reputable Member
Joined: 17 years ago
Posts: 363
 
Your code jurisdiction will have some say as to what type of phone line can be used. You cant go wrong with an old analog line.



   
ReplyQuote
(@kaneco)
New Member
Joined: 17 years ago
Posts: 2
Topic starter  
We have approval from the City to use a VOIP gateway, but for some reason we can't get reliable connections.

The Cisco VG has an On Hook voltage of 44VDC. Could this be the problem?



   
ReplyQuote
(@indirtwetrust)
Noble Member
Joined: 17 years ago
Posts: 1759
 
That should be fine. It's usually the off hook voltage that causes problems on these types of lines. The Thyssen cars should have Rath Phones, I don't think you will have a problem. Just make sure the line check feature gets turned off if it's a ring down.



   
ReplyQuote
Share:
Scroll to Top