Elevator Forum

Amtech Reliable Doo...
 
Notifications
Clear all

Amtech Reliable Door Print

7 Posts
2 Users
0 Reactions
8,881 Views
(@halfpick)
Reputable Member
Joined: 17 years ago
Posts: 239
Topic starter   [#20041]
I seem to be missing the print that shows the power door card and door operator. I have a Traction job under 200 FPM. Any help with a drawing would be much appreciated!



   
Quote
(@indirtwetrust)
Noble Member
Joined: 17 years ago
Posts: 1759

   
ReplyQuote
(@halfpick)
Reputable Member
Joined: 17 years ago
Posts: 239

   
ReplyQuote
(@halfpick)
Reputable Member
Joined: 17 years ago
Posts: 239
Topic starter  
Taking out F8 Fuse when power is applied. Suspect the board but have no information on this circuit or how it operates? This looks a bit different than a regularly used open and close relay!



   
ReplyQuote
(@indirtwetrust)
Noble Member
Joined: 17 years ago
Posts: 1759
 
Just sent you something. First check the caps in the controller! Should be 2 uf caps in series. Common failure that blows fuses, and not always immediately. It's pretty simple though, you can test and replace the components on the board. Just don't overlook the steering diodes that they add in the MOD box itself.



   
ReplyQuote
(@halfpick)
Reputable Member
Joined: 17 years ago
Posts: 239
Topic starter  
Are the capacitors in the lower part of the cabinet by the board? And are the steering diodes in the operator? Looks like maybe the SDO/SDC cams? Thanks for the information!



   
ReplyQuote
(@indirtwetrust)
Noble Member
Joined: 17 years ago
Posts: 1759
 
Caps are usually in the top right corner of the controller, they're about 1" dia. X 5" long, usually blue. The diodes are in the operator to make the MOD work with the solid state board.



   
ReplyQuote
Share:
Scroll to Top