Notifications

Clear all

Access Elevator Problem

Guest · 2024-07-18T00:34:00Z

Hey guys, I am an above-average homeowner with mechanical and electrical skills who is struggling to fix his elevator.I have been through the wringer a bunch on my elevator. I had it up and running and some people were testing the replacement of my curtains (I ordered new ones from woodfold) while I was away. Apparently, a zip tie broke and a line of MC with the front curtain safety switch, the top of car E-stop, and a cat 5 we ran to move the battery to the top of the car for easy replacement were snagged and froze up the elevator. We replaced the wiring and I am to the point where the safety circuit is entirely whole. A fuse (the 2amp slow blow I think is 24v line) was blown and I replaced this as well. We re-routed the MC that was enasing the wires and we zip-tied it. We have tested everything and I have gotten the elevator to show that everything is "normal". The problem I am running into is the elevator car will not move. We have cranked it manually and it will move up and down. I don't believe that mechanically it is bound. With my pendant, I cannot get the car to move in either direction. It will start to move and then fail stopping its whine. It will maybe move 1/4" or less. My thought is that the electronic brake isn't letting up. When in Auto mode the contactor for the brake is pulling in. When I go in Remote mode and use the pendant I press the safety and up or down and the contactor also does pull in - but the behavior is still as if the brake is engaged. How this is related to the incident where the MC with those wires were torn is unclear to me but things were functioning properly prior to this incident. I am under pressure because my father-in-law lives in our basement and he can not climb the steps. The only way he can get to the main living area is via this elevator. Any suggestions or recommendations would be very appreciated. I follow all safety standards and I take it very seriously. I don't want to get hurt or injured working on this so I am very careful and I realize any suggestions here are at my own risk. I am just up the creek without a paddle at this point and struggling to find a solution and concerned I have a major motor issue which I pray is not the case.Thanks in advance and for reading this far!Neil

Page 2 / 2 Prev

Technical Questions

Last Post by Anonymous 1 week ago

21 Posts

1 Users

0 Reactions

11.9 K Views

RSS

lowoil

(@lowoil)

Joined: 1 second ago

Posts: 0

13/08/2024 6:37 pm

Thanks for the update, it'll seem like nobody replies on the fix here.

ReplyQuote

EElevator

(@EElevator)

Joined: 1 second ago

Posts: 0

13/08/2024 7:22 pm

Oh my. You need to move your father in law out of the basement. Having to rely on the elevator or he cant get out is a poor decision.

This thread was good entertainment but honestly horrifying to read.

ReplyQuote

Neil H.

(@Neil H.)

Joined: 1 second ago

Posts: 0

Topic starter 15/08/2024 2:50 am

He can get out of the house - he can not come to the living space with the rest of the family

ReplyQuote

Neil H.

(@Neil H.)

Joined: 1 second ago

Posts: 0

Topic starter 15/08/2024 3:32 am

yeah I was shocked and excited to get it working again. The big problem with these lev elevators is Access2Parts doesn't have a guy to work on making new ones and the software is pretty locked up.

ReplyQuote

tthh

(@tthh)

Joined: 1 second ago

Posts: 0

15/08/2024 3:50 am

Good job!

ReplyQuote

Neil H.

(@Neil H.)

Joined: 1 second ago

Posts: 0

Topic starter 15/08/2024 9:31 am

Thanks it was a tough puzzle and really was stressing me out - but I am happy to have gotten it solved even if it took 60 hours 🙂

ReplyQuote

Page 2 / 2 Prev

13 Forums
7,385 Topics
41 K Posts
3 Online
1 Members

Forum Icons: Forum contains no unread posts Forum contains unread posts

Topic Icons: Not Replied Replied Active Hot Sticky Unapproved Solved Private Closed