Elevator Forum

Yep in this instance I would replace the reed switch sensors on the car and be done with it. If it isn't them, at least you know, they are ok(apart fr...

This is a classic case( when it can get complicated) when sometimes it is easier to wire the readers outside of the lift control and just use a relay ...

Sounds to me if you have either a coil that is on the way out and your movement vibration ticks it over enough to come in or a dicky earth on the cabi...

Agree GP if this is just a normal call and the doors are staying open, then go onto nudge then yes I would check the DOL. Strange that this is only at...

I would check the homing function to see if there is a door sub section included but the system sounds a little flighty.

poons since you see the input change it suggests the hardware is ok but isn't latching. It may be a security setting.

Poons I would say if you have proved that a) an individual button assembly works in another position or another works(or the fault stays the same) in ...

Poons does this type of lift have button modules that are specifically id'd for a certain level so you need to replace them with a specific part or ar...

Can someone clarify what you mean by the 'e brake'. I understand this is an emergency brake but in what application does it activate? Is this just an ...

Chicago, did you check for a stuck button or relay on the lowest landing holding the doors open? Ask the maintenance man is the bottom landing button ...

Originally Posted By: halfpick Yeah, I got that..And G is a floor below 1 which was the old main lobby for the elevators! G is now the new lobby, but ...

Originally Posted By: halfpick You bring up a good point. Is it homing you want to change or Next Available with doors open and hall lantern lit? My c...

Originally Posted By: halfpick There you go. Find a unused back contact of the floor you want to home and a timer to activate when car is away from la...

Originally Posted By: halfpick If "g" happens to be the bottom landing now it will have a B69 relay. If extra unused contacts are available simply ins...

Originally Posted By: jkh UppoI'm trying to find out more.E-manI'm 99% sure that is correct. Interesting.... Does this system operate like the Otis ...