Elevator Forum

You cannot disconnect the series field from the GSEF. It is wound in the pole piece so the self excited field can build. If you listen and do what I t...

Do everything on inspection and use Uor D and H for leveling field.

Your GSEF is backwards to the Series field. reverse the leads, then use the leveling field leads to make sure car runs right direction. If wrong rever...

Reminds me of an old otis guy in Columbus. Owner sent a print and the guy worked for hours. Did not get it running. Owner said " Well I sent you a pri...

PM me an email, I have a print

Who did you buy the operators from, Kone or Cetek? I would call their support if instructions are not clear. Could be something new for DLM (door lock...

You have to set the pcc-10 card to talk to lon. Plug the card in, Open control panel. Open Lonworks plug and play. In NI application Select NSIPCC. Pr...

That sure looks like a 63 GA. The 63 changes series field taps with a wire GSF to GSF2 is 3 turns per pole. GSF to GSF 1 is 4 turns per pole. GSF 2 to...

Can you send a pic of the full generator? I asked the international Otis Field Engineer and he never heard of a 65 GA either. Could be miss stamped.

Interesting, I never saw a 65 Generator. 65 Is a controller Type. 63, 71, 82 are generators.

If your motor shop reversed the GSEF leads, you may need a connection diagram of the generator. They could also have series field wrong. What generato...

Possible High Mica on Generator bars, If this is a self excited field there is a rectifier in the loop circuit that will cause that. It has 3 leads on...

Thanks to you Thyssen will now change it.. Duh!

Swift Futura is one of the models, Merida is another, and 5000 is another.

Be nice if you said the model of the swift? They do have several models.