Elevator Forum

pieman
@pieman
Estimable Member
Joined: Jan 1, 2010
Topics: 9 / Replies: 94
Reply

The fault is saying that its not seeing the expected brake state from the sounds of it and yes the micro switches notoriously go bad ( I have had to c...

9 years ago
Reply

I had to change the seals and check valves on a two stage that was doing this . Make sure you have a decent chain wrench . There is a write up someone...

9 years ago
Reply

I agree rolly , I hate having to tell customers that a set of detectors I installed a couple of years ago or a drive only a year ago is now 'obsolete'...

9 years ago
Topic
Replies: 3
Views: 3837
Reply

I didn't know stannah had a prescence in the states , if you are struggling let me know and I may be able to put you in touch with someone who works f...

9 years ago
Reply

What did the MCB log say ? I've not worked on European controllers for 9 years , we used the 220 back then for traction . Guess the 321 is similar ..

9 years ago
Reply

I'm sure even if your using a controller from Berlin you can still check the M222 log for reasons a learn run is aborted

9 years ago
Reply

Are you in the states ? I've not heard Americans refer to controllers as MCS before .. That's how we refered to controller in the u.k ..mcs 120 , mcs ...

9 years ago
Reply

Check the mcss log for the reason the learn run was aborted . I'm not sure what the 321 controller configuration is ? You are outside of the states ye...

9 years ago
Reply

Ok , so if this is a GCS controller then when there is an aborted learn run it will give the reason in the mcss log ( 2-2-2 ) it should display LRN AB...

9 years ago
Reply

I'm sure in the learn run section of the manual I have it gives reasons for an aborted learn run . Let me check tomorrow .

9 years ago
Reply

I've got some paperwork somewhere on aborted learn runs possible reasons. Back in work tomorrow I will take a look .

9 years ago
Reply

Ask Otis to look at it , give the office you deal with the serial and sales number off the data plate . They will know what it is they are going to lo...

10 years ago
Reply

Irab . Please call an elevator professional , Otis is your best bet but any of them will take a look . You do not want to play around with an elevator...

10 years ago
Reply

" I am ahead of my time here " ...yep that's the problem. " the elevator will fall to the bottom floor " ...i certainly hope not. If by what you mean ...

10 years ago
Page 2 / 7
Scroll to Top