Elevator Forum

GentlemenI have the same problem of password. If what I did below locks the motherboard, please advise how to make it operate in normal.Only two stops...

Hi Volunteer 19The service chap has disabled relevelling. This is why when a lift halts for a long time at a floor, the piston sinks, the lift leaves ...

You say it only happens at top floor and not at the intermediate floor correct?If this is the case, are your terminal switches interfering with the no...

Hi Volunteer 19. If the lift works correctly after reset by switching off the power and switching it on, most probably it has nothing to do with the h...

Maybe the travelling cable conductor feeding the sensor is open. Try putting a spare conductor in parallel and see if the problem is resolved. Please ...

Please check there is no air in the system. Consider stopping the lift on the top floor for 2-3 hours or overnight so the air separates from the oil. ...

Please check four points.1. Check that the encoder wires are running separate from other wires.2. Check whether the encoder is tightly fitted in posit...

Is it a relay controller? Could we get a copy of the wiring diagram to trace the circuit related to re-opening of doors. I believe the wiring diagram ...

I Sincerely thank the moderator for accepting me in this group. I hope I can add value to this group. Kind Regards. Neville