Elevator Forum

Pat, I would love a copy if they are still available. [email protected]

Looks like an old Matot

I am not sure of this, BUT, I believe that if you have the modem to hook to the LEV unit, you can call into the controller and use IMS to program the ...

C2 Elevator has made two attempts to run,but was not able to run properly. However, it was able to return to floor level, and is being shutdown to pre...

Did you get it fixed? What kind of WOV residential elevator was it. Roped hydro, overhead drum, basement drum??

It also appears to be a hydro. Disassemble very carefully, lots of pitfalls if you are not familiar?

What city are you in? That is a Genesis Enclosure model. Are you an elevator mechanic? Are you licensed to do this kind of work?

Core should have a groove around the top indicating a hardened core. Also on a set-reset relay, there is a small kickoff spring at the top edge of the...

condition of NP Relay

voltage from ATC to S+ ???

Check relay ATO, is it in? are all your wire contacts in ATO in good shape?

What city are you in?

Look on the back of the controller at the fuse block. Otis printed the original value of the fuse there.