Elevator Forum

Another option is to replace the GAL nylon rollers with SEES or Adams GAL replacement poly rollers. They don't need a roller cleaner/wiper.

I'd trust MCE better than SmartRise.

They only have spare parts now. The best conversion pkg is the Wittur SGV or AMD. You will need to replace tracks on the cab side, but not the hall si...

This is the 2004 version:https://ia800302.us.archive.org/26/items/gov.law.asme.a17.1.2004/asme.a17.1.2004.pdf

If the switch is connected directly to the controller, which it should be, you could just use a jumper. Just make sure you remove it when done!

Oh, I forgot to mention OLS (GMV). They only make side opening doors, not center.

Don't forget about Fermator. This is who Schindler uses.At least after the Vantage buyout, GAL began making more safer/modern door operators like the ...

Wittur (SGV, Sematic, AMD)

Also, the interlock skate and dumb skate of the clutch should both be of equal distance from the pick-up rollers (centered) when the clutch is in retr...

There's a Turkish company called Alyans. Although they are a competitor, their skates and locks are identical to their Fermator counterparts and are i...

If you have the Delta version. This doc should help. https://www.gal.com/wp-content/uploads/2021/01/MONXT-Operator-Installation-Manual-DELTA.pdf The m...

Are you trying to get the direct replacement for the AT from GAL: https://www.gal.com/wp-content/uploads/2023/08/GAL-MONXT-OMNI-Telescopic-Linear-Oper...

If you want to go completely generic, Imperial Electric makes a machine to looks just like the KONE EcoDisc (540 series). I this scenario, you would h...

The only thing I could think of would be a Schindler 31/3300/5500 or TK EOX/Evolution. They have similar drive systems. At least more competitors can ...

Don't forget about FSSG.