Elevator Forum

Notifications
Clear all

tms 900 door issue

5 Posts
3 Users
0 Reactions
5,146 Views
(@vatorman)
Active Member
Joined: 17 years ago
Posts: 3
Topic starter   [#1580]
Have a tms 900 gearless car (500fpm)that intermittantly won't open the doors on a 1 or 2 floor run, but will open on a multifloor run. We have changed the I/O boards, the BAM board, the cpu board, the matrix board, the prom board. Swapped the tachs, updated the floor table. The door limits are in the proper state. Have changed the 487 relays and checked the state of all contacts in general. Replaced the door zone optic switch on the landing system. The mode of service doesn't effect the problem - ind. srv., auto,firemens etc.. The car functions normally except for this with no fault indication from the BAM board. Resetting the processor makes the trouble disappear for up to 2 months. Any suggestions?



   
Quote
 Vic
(@vic)
Honorable Member
Joined: 17 years ago
Posts: 532
 
Sorry for the dumb question, but...What's a "tms 900"

nvrmnd, found it. Some kind of Kone product, yes? Before the wonderful and excellent KCM 831 control?

Last edited by Vic; 07/06/11 01:33 AM.


   
ReplyQuote
(@vatorman)
Active Member
Joined: 17 years ago
Posts: 3

   
ReplyQuote
(@smitty)
Reputable Member
Joined: 17 years ago
Posts: 220
 
How is the car's approach to the floor? Some controls will inhibit automatic door opening if the velocity in the door zone is over the limits. Just a thought anyhow.



   
ReplyQuote
(@vatorman)
Active Member
Joined: 17 years ago
Posts: 3

   
ReplyQuote
Share:
Scroll to Top