Elevator Forum

TAC 32 Hydro 2036 I...
 
Notifications
Clear all

TAC 32 Hydro 2036 IGBT Fault

5 Posts
3 Users
0 Reactions
3,373 Views
 seth
(@seth)
Eminent Member
Joined: 17 years ago
Posts: 18
Topic starter   [#33068]
Hello all. Im having an issue with a TAC 32 intermittenly throwing a 2036 IGBT fault. The door motor w/encoder and door board have been replaced. The doors are free not in a bind, checked all the wiring terminations, secured all the grounds. It will run fine for 45 minutes to an hour then faults out. Its happened during doors opening, doors closing, and also when staionary at a landing with no door demand. Any help would be greatly appreciated.



   
Quote
(@wltr00)
Honorable Member
Joined: 17 years ago
Posts: 359

   
ReplyQuote
(@indirtwetrust)
Noble Member
Joined: 17 years ago
Posts: 1759

   
ReplyQuote
 seth
(@seth)
Eminent Member
Joined: 17 years ago
Posts: 18
Topic starter  
The door board (6300PA6) p/n 98023877
Door Motor (1/6 HP) p/n 9817920 Currently on back order. Had a spare used board.

Yes, we tried both transfering through IMS, loading defaults, and comparing to an identical unit. Still same issue. Possible next step CWIL board?



   
ReplyQuote
 seth
(@seth)
Eminent Member
Joined: 17 years ago
Posts: 18

   
ReplyQuote
Share:
Scroll to Top