Vertical Express said it was set up as a harmonic instead of a Linear and sent me a hyper terminal adapter and a couple manuals they told me I can change it, but I don't see where to do that. None of the parameters in the manual have a Linear vs Harmonic profile that I can see.
I have a laptop set up with the adapter as recommended by Vertical Express.
Any help would be appreciated.
I have the LD-03 Door Operator manual from Vertical Express & the Door Card Replacement Procedure for Card Series 6300PA_ & 6300ABN_
Vertical express gave me info to set up a laptop with the hyper terminal which they tell me should work. I don't have a UIT. Although someone recently told me that a UIT for door operators only could be carried from job to job. If thats true, the boss may let me buy one.
I will try that parameter and let you know if it worked. Thanks for the help.
Are you putting JP3 on to put the board in Z Modem?
If it has R24 software there is a new menu that has the preset profiles in it.
I will probably try to power up one of the old boards we have around the shop and see if I can make any changes.
Thanks for your help =)