Elevator Forum

Forums
General Discussion
Technical Questions
Schindler not movin...
 
Notifications
Clear all

Schindler not moving after Deep Switch 8

 
Technical Questions
Last Post by Anonymous 1 week ago
7 Posts
1 Users
0 Reactions
5,339 Views
RSS
 wiz
(@wiz)
Joined: 1 second ago
Posts: 0
Topic starter 31/07/2022 4:45 am   [#33538]
Greetings

We did a learning measurement trip on a schindler smart mrl 002 elevator using Dip Switch 8 on the main controller board. The lift learnt the floors, after the learnt trip it goes to the last floor
and shows the WDOG, Drive, KS, and Error LED blinking and remains on the last floor.
Anyone experience this problem, what causes it? Can it be corrected?

Regards



   
Quote
 wiz
(@wiz)
Joined: 1 second ago
Posts: 0
Topic starter 01/08/2022 2:54 am  
Originally Posted by wiz
Greetings

We did a learning measurement trip on a schindler smart mrl 002 elevator using Dip Switch 8 on the main controller board. The lift learnt the floors, after the learnt trip it goes to the last floor
and shows the WDOG, Drive, KS, and Error LED blinking and remains on the last floor.
Anyone experience this problem, what causes it? Can it be corrected? No safety circuit open, but something is
blocking the lift from moving, any ideas?

Regards



   
ReplyQuote
 sampler
(@sampler)
Joined: 1 second ago
Posts: 0
01/08/2022 3:49 am  
sim

Last edited by sampler; 07/31/22 08:07 PM.


   
ReplyQuote
 wiz
(@wiz)
Joined: 1 second ago
Posts: 0
Topic starter 01/08/2022 6:53 am  
Are you saying the SIM card might be faulty or not in place properly but lift did a shaft measurement?



   
ReplyQuote
 sampler
(@sampler)
Joined: 1 second ago
Posts: 0
01/08/2022 10:50 pm  
yes. it goes for learning trip although without sim and after trip if it can not read sim it behaves as you menioned.



   
ReplyQuote
 wiz
(@wiz)
Joined: 1 second ago
Posts: 0
Topic starter 05/08/2022 2:57 am  
Originally Posted by sampler
yes. it goes for learning trip although without sim and after trip if it can not read sim it behaves as you menioned.

Greetings

I tried re-inserting the sim. Is there a way to solve this problem besides replacing the SCIC?

Regards



   
ReplyQuote
 sampler
(@sampler)
Joined: 1 second ago
Posts: 0
05/08/2022 4:13 pm  
maybe replacing SCIC may not be a solution. generally sim is broken. so if you have a bionic controller (bx, 3300 etc..) and also cadi you can check Sim. if not possible the company support should be requested.
I

Last edited by sampler; 08/05/22 08:14 AM.


   
ReplyQuote
Forum Jump:
  Previous Topic
Next Topic  
Share:
Scroll to Top