Notifications
Clear all
Topic starter
13/01/2018 7:38 am
Hi Guys:
Having problem with Micronic A
Having problem with Micronic A
Fault code: 13: EMS ACTIVE
KSD Fauilure
No idea what it mean.
Is anybody have the fault code chart?
Thanks,
Ken
13/01/2018 10:29 am
AC Drive ?
MG ?
MAgnetek ?
MG ?
MAgnetek ?
http:/
Originally Posted by kenelev
Hi Guys:
Having problem with Micronic A
Having problem with Micronic A
Fault code: 13: EMS ACTIVE
KSD Fauilure
No idea what it mean.
Is anybody have the fault code chart?
Thanks,
Ken
Topic starter
14/01/2018 2:52 am
Schindler vfac drive
15/01/2018 6:34 pm
I am having the same problem sound like one or more the 6 IGBT's may be failing. Is the power supply on the drive cover on?
15/01/2018 8:11 pm
Take a good visual look at your igbt's. Look for cracks and/or where silicon has leaked out. Even if they look good, Google search "how to test igbt's" and with your meter , test them all individually. In the past couple of years I've had to replace a few on a miconic A with AC drive. One had actually exploded and slung silicon all over controller.
Topic starter
16/01/2018 11:24 am
Thanks,
I check it out tomorrow
I check it out tomorrow
Topic starter
03/02/2018 1:15 am
Hi Guys:
After change out the IGBT
this is new error
Auto stop error
Picked DRUN
NO KRUN
CLR ENC
Any idea?
Can anybody send me a complete fault list?
Thanks,
Ken
After change out the IGBT
this is new error
Auto stop error
Picked DRUN
NO KRUN
CLR ENC
Any idea?
Can anybody send me a complete fault list?
Thanks,
Ken
29/03/2018 7:04 am
Miconic A acvf, look at the leds on the vector board. They will usually point you in the general direction. make sure you have checked the drive fan, make sure it's moving air. that will give you intermittent ksd faults