Notifications
Clear all
Topic starter
17/03/2016 8:09 am
Have error 57 mcr no stop with no extra info, 145 safety t3 with extra info 00024356 and a 7 sh fault with extra info 00000008. Trying to find problem with car stopping between the 6th and 8th landing on auto. 8th being the terminal. Any help is appreciated
17/03/2016 9:14 am
What fault happens first?
Topic starter
17/03/2016 9:28 am
I think in that order, just going by screen shots from one of my mechanics
17/03/2016 9:51 am
The xtra info on the T3 is the car position when that fault occurred.
Topic starter
17/03/2016 10:10 am
Is that a pulse count
17/03/2016 10:45 am
Yes. It says pos abs or actual pos or something like that, it's not hard to find. You just have to register calls and run the car and go back and see what the value per floor is.
17/03/2016 11:05 am
Flt 7 is a SH1 OR SH AUX contact open during run. Pull the wire during a run and see if the same flt sequence is created. Also 57 is communication to the drive flt. Do the same. Pull the communication connector & see what sequence follows. Same for safe circuit flt.