Elevator Forum

Notifications
Clear all

Otis problem..

6 Posts
5 Users
0 Reactions
5,804 Views
(@gnick)
Trusted Member
Joined: 17 years ago
Posts: 27
Topic starter   [#12133]
Hi guys,

Kindly request some help on one of my elevator OTIS Spec60 Nippon type.

on drive, appeared on Fault mode, CUR CONT. May i know what is that mean?
Drive defective?

Tq



   
Quote
(@alex75)
Estimable Member
Joined: 17 years ago
Posts: 130
 
Well, the manual to a SPEC90 has the same error code...

CUR CONT >> 38 CUR CONT Current Control Abnormal, Fault.

/Alex



   
ReplyQuote
 E311
(@e311)
Reputable Member
Joined: 17 years ago
Posts: 363
 
If this is a "true" Nippon, it's considered a Spec 50, parts are pretty much nonexistant.

Last edited by E311; 09/25/14 09:37 PM.


   
ReplyQuote
(@gnick)
Trusted Member
Joined: 17 years ago
Posts: 27
Topic starter  
Thanks for answer guys.
It is true, it is pretty much nonexistant but just want to find out the problem.
Current control abnormal fault,
From what i guessing is the Main Drive error, defective parts like IGBT, logic board, power interface board which all locate on Main Drive.

Anyone experience this before?
TQ



   
ReplyQuote
(@greenpants)
Reputable Member
Joined: 17 years ago
Posts: 276

   
ReplyQuote
 jkh
(@jkh)
Prominent Member
Joined: 17 years ago
Posts: 904
 
Forgive me, I'm not familiar with this unit.

Is there several types of digital signal sources that track speed, position and such. Is it possible that there is a difference between the two signals that could cause such a fault?



   
ReplyQuote
Share:
Scroll to Top