Notifications
Clear all
Topic starter
30/03/2016 10:02 am
Hello guys
I have a problem of our elevator.
It's running automatic and normal but it has a time that when the door close, it won't run, the indicator tells the direction but the floor level tells no indication ('- -')
. When we reset the elevator, it's still not running.
I have a problem of our elevator.
It's running automatic and normal but it has a time that when the door close, it won't run, the indicator tells the direction but the floor level tells no indication ('- -')
. When we reset the elevator, it's still not running.
Need help
30/03/2016 8:54 pm
you should call a reputable elevator company.
26/05/2016 2:36 pm
you must know a error by a tools , by the way may be need to do a DCS start run to check doors , this mode is important by tools
29/05/2016 3:10 pm
i have doubt there is a problem in RSL (serial communication)
check the 30Vdc power supply, Ground , D1 and D2.
check the 30Vdc power supply, Ground , D1 and D2.